Setari igo8,amigo,Primo

Mai jos veti gasi o multitudine de setari pentru personalizarea softurilor IGO,AMIGO si PRIMO. Aceste setari se fac de regula intr-un fisier tip Notepad, cu terminatia .txt. Acest fisier se cheama sys.txt si se adauga in softul de navigare langa executabil.

Din aceste setari, amintesc:

[device]
;type=”navon_N480″ ; let soft find out

;### general smartzoom settings
; angle: 0 = from top, 90 = horizontal but crash (max is 89)
[camera]
; common settings
maxdistance=1000
maxdistance2d=1000
; 2D settings
minzoom2d=200
maxzoom2d=1500
defaultzoom2d=1200
; 3D settings
minzoom=40
maxzoom=100
defaultzoom3d=80
minangle=40
maxangle=89
defaultangle=85
angleoffset=25
;### test
overview_enabled=0 ;0 1 Always North Up?
overview_distance=2000
overview_zoom2d=2000
overview_zoom3d=100
overview_angle=0
;### test
speedzoom=0 ; speed dependend zoom
speedzoom_use_minmax=1 ; minzoom/maxzoom
speedangle=1 ; speed dependend cam angle
speedangle_use_minmax=1 ; minangle/maxangle
lowspeed=5 ; if minmax this speed is for min val
highspeed=70 ; if minmax this speed is for max val

;### Entries presets Smartzoom (sc_Set_Presets)
;Camera Presetid 1 (low viewpoint)
[camera1]
; common settings
maxdistance=700
maxdistance2d=700
; 2D settings
minzoom2d=100
maxzoom2d=400
defaultzoom2d=300
; 3D settings
minzoom=40
maxzoom=90
defaultzoom3d=70
minangle=50
maxangle=89
defaultangle=85
angleoffset=20

;### Entries when Signpost is visible (sc_AngleSignPost)
;Camera Presetid 11 (low viewpoint)
[camera11]
; common settings
maxdistance=700
maxdistance2d=700
; 2D settings
minzoom2d=150
maxzoom2d=600
defaultzoom2d=400
; 3D settings
minzoom=40
maxzoom=90
defaultzoom3d=90
minangle=50
maxangle=89
defaultangle=85
angleoffset=0

;Camera Presetid 2 (normal viewpoint)
;[camera2]
;maxdistance=1000
;Camera Presetid 3 (high viewpoint)
;[camera3]
;maxdistance=5000

;Camera Presetid 21 (normal viewpoint)
;[camera12]
;Camera Presetid 31 (high viewpoint)
;[camera13]

[camera.roundabout]
enabled=0 ;(1)

[camera.intersection_zoom]
enabled=1

[other.fm_transmitter]
fmtx_enabled=0 ;needs proper nnghal.dll

;[modules]
;IFM_TRANSMITTER=”NNGHAL_FM_TRANSMITTER”
;IFM_TRANSMITTER_MANAGER=”FM_TRANSMITTER_MANAGER_IMP”

;[swid]
;activation=device ;getsysentry card or device

[msnd]
enabled=0

;########################################################################
[route.histspeed]
enabled=1
show=1 ;Vizualizare pe harta, in culori diferite, în funcţie de trafic;
use_timeslice=0 ;Utilizarea setarii pentru calcularea traseului in intervale de timp;

[2d]
carcenter_y=35
label_rendering_order=”texts,shields,icons” ;(icons,shields,texts)
building_draw_outline=1 ;(0)
building_maxzoomlevel=500 ;(500)
draw_polygon_contours=0 ;(1)
drop_little_road_segments=1 ;(0)
show_planned_route_arrows=1 ;(1)
road_simplification_level=5 ;(5)
adaptive_2d=1 ;(1)
group_poi_icons=0 ;(1)
max_icons_shown=20 ;(30)
enable_icon_fight=1 ;(0)
use_r1_roadnames_for_r2_if_missing=1 ;(0)
traffic_lights=1 ;(0)
mincarsize=80 ;()
mincarsize_zoomlevel=2000
maxcarsize=150 ;()
maxcarsize_zoomlevel=200
min2dplannedroutewidth=5 ;(5)
render_during_animation=1 ;(0)
;loading_screen_text_color=0xFFFFFF ;(0)
;loading_screen_color=0xFFFF ;(0xFFFF)

[3d]
disable_car_normals=1 ; mdl surface normals discard
anti_alias_buildings=0 ;(0)
anti_alias_landmarks=0 ;(0)
anti_alias_shapes=0 ;(0)
landmark_min_brightness=300 ;(700)
max_pois=60 ;(97)
max_pois_on_horizont=12 ;(17)
use_all_building_textures=0 ;(1)
render_buildings_as_shapes=0 ;(0) buildings (3dc) flat on the ground
roads_as_line_stripes=1 ;(1)
reduce_line_stripes=1 ;(0)
asymmetric_projection=0 ;(0)
planned_route_visible_behind_mountains=0 ;(1)
;planned_route_track_width=8 ;(10)
;planned_route_track_contour_width=1 ;(2)
;planned_route_contour_width=2 ;(4)
car_antialias_mode=edgeblur ;(supersample) edgeblur
fade_around_cursor=1 ; when click on map buildings fade
fade_distance_for_car=60 ;(20)
fade_overlap_tolerance=50 ;(32)
;tmcroadthickness=”0.5″ ;(0)
;plannedroutethickness=”0.2″ ;(0)
;guidancestrip_thickness=”0.2″ ;(?)
elevate_guidance_strip=1 ;(1)
guidancestrip_elevation=0.08 ;(0)
;guidance_strip_switch_distance_meter=300
;guidancestrip_startscaledist=300
;guidancestrip_stretch=25
;global_ambient=0x7AE147AE ;(0x7AE147AE)
;poi_min_lod=12 ;(11)
;use_vertex_color_triangles=1 ;(1)
cell_road_density=200 ;(400)
;road_polytrack_switch_pixelwidth=10 ;(12)
minimum_flag_distance=5000 ;(50000)
;min_task_processing = 5
near_roads=1 ;(1) ??
far_roads=0
shapetile=1
shapeline=1
pois=1
building=0 ;(1) disable buildings
min_camera_height=1 ;(0)
;forced_fov=35 ;() overrides fov?

[3d_config]
roadsign_bitmaps=0 ;(0) 1 in igo9.ini, bmp text balloons
;are the bubbles only active in navigation mode (0) or also in drag mode(1)
;roadsign_always_framed=0 ;(0)
;roadsign_frame_space_size=4 ;(4)
;roadsign_font_size=12 ;(0)
;disable_roadsign_navigation_mode=0 ;(0)
navi_mode_roadsign_dist_limit=800 ;(0)
navi_mode_roadsign_zoomdist_limit=1500 ;(1500)
roadsign_max_refresh_time=800 ;(400)
;rotated_roadsigns=1 ;(1)
;hide_tmc_on_road=0 ;(0)
;default_label_colors=0 ;(0)

;Sprites if [3d_config] roadsign_bitmaps=1
;[roadsign_sprites]
;Sprite names, should be in theme folder
;main=”street_name_main.spr”
;left=”street_name_left.spr”
;right=”street_name_right.spr”
;leg_left=”street_name_leftleg_dn.spr”
;leg_mid=”street_name_midleg_dn.spr”
;leg_right=”street_name_rightleg_dn.spr”
;font_color=32,32,32

;########################################################################

[debug]
;### this creates detailed running logfile for tts etc
;log_1=”\Storage Card\igo8_primo\_debug.log::5″
animations=0 ;getsysentry
disablesmartdetour=0 ;getsysentry
tmc_provider_list_plus=1 ;getsysentry
skindebug=0 ;getsysentry
showsuspendmessage=0 ;getsysentry “Back from Suspend”
usenightmode_tunel=1 ;getsysentry
petza_enabled=0 ; somethings with recording/debug?
show_battery_percent=1 ; battery level text below bat icon
experimental_features=1 ; extra settings in extra menu
;leak_check=1 ;looks like primo leaks
;skip_platformlock=1 ;(0) hmmm…
skip_wce6_deviceid=1 ;(0) hmmm…
tmc_all_stations=1 ;(0)
hnr=1 ;(1) use hnr, see [route] minimum_hnr_distance_km
skip_eula=1 ;skip end user lic aggr
;show_frc=0 ;0
smart_2d=1 ;0
earth=1 ;0
show_junction_view=1 ;0 see config\junctionviewXXX.ini
show_gps_pos=1
show_signpost=1
show_oneway=1 ;0
show_oneway_3d=1 ;0
;onewayarrowmode=2
;show_hnr=1
;show_clipboard_path=1
show_arrows_on_route=1
show_lane_info=1
show_poi_areas=1 ;(0)
show_poi_boundingrects=1 ;(0)
;plannedroutethickness=”0.8″
;farguidancestripthickness=2
;tmcroadthickness=”0.9″
;render_without_focus=0 ;(0)

; TTS settings
tts_min_ready_wav=1 ;(0)
tts_getaway_time=400 ;(0)
tts_expected_engine_delay=1200 ;(0)

;reserve_memory=2097152 ;(0) default 4Mb, don’t use less that 1Mb (1mb=1048576 2mb=2097152 3mb=3145728)
;memory_low_bound=1048576 ;(0) bits? kb?
;show_performance_memory=1
;show_performance=1
show_rawdisplay_info=0 ;(0) handy for seeing what igo chooses as display driver
monkeytest_highspeedsun=0 ;(0)

;fov=45 ;(45) for 480_272 is set to 35 in igo9.ini, affects angle/zoom bigger makes 3d car smaller

logitiner=full ;(off) on full, itinerlog.csv on sdcard

;show_turn_penalty=1 ;(0)
;turn_penalty_multiplier=50 ;(100) < 100 accepts more turns in route, try 46 for ECO turn_penalty_multiplier=40 test_recalc=1 ;(0) ;# Primo 1.1 tmc_info_in_description=1 ;(0) tmc_extract_no_slipblocks=0 ;(0) tmc_extract_all_segments=0 ;(0) tmc_group_mask=xFFFFFFFF ;(0xFFFFFFFF) ;######################################################################## [feature] signpost_nightshading=1 ;(0) signpost_coloring=1 ;(0) tmc_event_coloring=1 ;(0) tmc_traffic_side=1 ;(0) tmc_show_direction_arrows=1 ;(0) tunnel_guidance=1 ;(0) 1 causes crash ;######################################################################## [folders] app="%SDCARD%/iGO8_PRIMO" ; change this if applicable data="/Storage Card/iGO8_PRIMO" ; content="/Storage card/igo8/CONTENT" kmlpoi="userdata\poi" ;"content\userdata\poi" kmlroute="userdata\route" ;"content\userdata\route" ;user_car="mycars" tts_nua_v5="\Storage Card\igo8_primo\tts_nua_v5" tts_loq="\Storage Card\IGO8\TTS_LOQ" ;needs loqmsx.dll LoqTTS6.dll LoqTTS6_util.dll LoqDutch6.5.dll has_secondary_root=0 ; do not search for other igo8 distributions ;######################################################################## [gps] disable_advanced=0 ;default_latitude="XX.3737921" ;default_longitude="XX.9059051" read_total_timeout=50 ;(100) read_buffer_size=128 ;(256) discard_dop_level=49.0 ;? min_distance_timestamp=3000 ;(20000) ;background_navigation=1 ;(0) delay=250 ;(250) ;######################################################################## [icon_manager] extra_icons="ui_igo9\common\brand_icons" ; in igo9.ini ;######################################################################## [interface] store_demo=0 ;getsysentry show_musicplayer=1 ;getsysentry show_pictureviewer=1 ;getsysentry ;lmg_all_days=1 ;getsysentry shutdown_time=30 ;getsysentry-> now fixed in 22jul2010 version
show_minimize=1 ;getsysentry
show_exit=1 ;getsysentry
start_navigation_time=5 ;(10) GetSysEntry
show_tutorial=0 ;getsysentry
small_build=1 ;getsysentry
extra_settings=1 ;getsysentry
;start_state=”st_MainMenu” ;getsysentry
vfont_enabled=0 ;.vfont files
font_quality=normal ;normal lcd lcd_v light mono
align_style=ascender ;ascender full capheight legacy
enable_stateanim=0 ;0
uieffect_enabled=1 ;1
;show_bugreport=1 ;0
;bugreport_audio=0
unreachable_viapoint_as_target=1 ;0
max_distance_for_route_to_poi=2000 ;0×2700
;screen_snap_distance=20 ;20
;mapfontscale=100 ;100 set to 130 in skincfg.ini
;mapfontscale2d= ;
;mapfontscale3d= ;
;mapfontscale3dframed= ;
;highlighted_cityname_first=1 ;0
night_mode_altitude=1 ;0
;make_up_exonym=1 ;1
showexitnum=1 ;1
;builtin_themes= ; skin *.gro *.zip
;theme_day=
;theme_night=
use_separated_daynight_list=0 ;0
minzoom2d=100 ;100
;maxzoom2d= ;calculated
minzoomglobe=100000 ;() 100km 2d zoom before switching to globe view
blendeffect=4 ;4
;min_doubletap_ms=
;min_doubletap_px=
;cleanup_config=”config/cleanup.ini”
;laneinfo_signpost_enabled=1 ;(1)
show_detailed_posinfo=1 ;0
show_tmc_config=1 ;(0)
show_gps_config=1 ;(0)
show_orientation=1 ;(0)
show_calibration=1 ;(0)
traffic_voice_recalc=1 ;(1)
traffic_voice_trafficjam=1 ;(1)
max_flag_distance_3d = 5000 ;(-1) always show dest flag in 3d
capture_to_jpeg=1 ;(0) else bmp
highlighted_cityname_first=1 ;(0)
use_autohint=1 ;(0)
useminaspect=1 ;(0)
make_up_exonym=0 ;(1)

;########################################################################

[itiner]
handle_via_passing_as_destination=0 ;(0)
remove_reached_destination=0 ;(1)
pass_destination_radius=200 ;(0)
pass_destination_distance=50 ;(0)
pass_via_distance=100 ;(0)
show_prev_manuevers=1 ;(0)
show_only_till_next_viapoint=0 ;(0)
show_only_ahead_of_car=1 ;(0)
displayed_warnings=”1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17″ ;(1,2,3,8,9,10,11,12,13,14,15,16,17)

;########################################################################

[map]
set_max_bubble_labels=8 ;(5)
3d_scale_carmodel=1 ;(1)
3dcarsizemulwithfov=50000 ;(0)
3dcarsizemin=6000 ;(10000)
3dcarsizemax=18000 ;(28000)
3dcarsizemul=30000 ;(40000)
3d_max_tiltlevel=8500 ;(7800)
3d_default_tiltlevel=8500 ;(7800)
zoomlimitedtilt=0 ;(0)
3d_min_zoomlevel=20 ;(30)
3d_max_zoomlevel=800 ;(600) before switch to 2D, getsysentry is 14000
;3d_max_zfar=64 ; still used? Not in Primo
tiltfactor=50 ;(150)
zoomfactor=1.02 ;(?)
rotfactor=20 ;(10)
;minimum_zoom_amount=70 ;()
;minimum_tilt_amount=70 ;()
;minimum_rotate_amount=15 ;()
;minimum_3d_zoom_percent=100 ;(100)

;max_road_segment_count=1000 ;(2000)
sieve_mode=0 ;(1) 0=wireframe faded buildings, separate what?
;###housenr_corner_offset=0 ;(0) causes crash with 3dl/3dc on

shade_factor_min=0.5
shade_factor_max=1.3
3d_brunnel_tunnel_shutdown=5

;poi_iconid_near=1 ;(1)
;poi_iconid_distant=0 ;(0)
;poi_distant_distance=2000 ;(3000)
;poi_grouping_distance=

speedcam_visibility=1500 ;(2500)

;car2wp_as_route=1 ;(1)
;speedwarn_icon=”$speedwarn.spr” ;(“$speedwarn.spr”)

;tmczoommin=3000 ;(3000)
;tmczoommax=60000 ;(?)
;tmczoommini=30000 ;(30000)
;tmczoomsmall=8000 ;(8000)

;3d_tmc_road_extra_width=0 ;(0)

;auto_nightmode=1 ;(1)
;nightmode_dependent_backlight=1 ;(1)

3d_buildings=0 ;(1)
3d_landmarks=1 ;(1)
raster_in_2d=0 ;(1)
raster_in_3d=0 ;(0)
raster_2d_high_quality=0 ;(1)
shapes_in_2d=1 ;(1)
show_oneway=1 ;(1)
follow_gps=1
auto_set_2d_on_map=0 ;(0)
auto_set_3d_on_cockpit=0 ;(0)
poi_labels=1 ;(1)

;no_road_rotate_speed_min=10 ;(10)
enable_rotated_move=1 ;(0)
;move_zoom_divider=15 ;(15)
enable_move_cursor_on_move=1 ;(0)
;center_animation=1 ;(1)
;3d_snap_distance=50 ;(50)
;2d_snap_distance=50 ;(50)
;3d_jump_distance=500 ;(500)
;2d_jump_distance=50000 ;(50000)

;grayscale=0 ;(0)

;########################################################################

[map_update_checker]
enabled=0

;########################################################################

[mydata]
cityhistory_size=1000 ;(300)
max_quicklist=250

[mydata.smart_history]
max_smart_items=4 ;getsysentry

[mydata.tracks]
auto_track_visible=1 ;(0)

;########################################################################

[navigation]
gps_pos_to_road=1 ;(1)
waypoint_radius=800 ;(300) waypoint visited if < 300 mtr? waypoint_radius_multiplicator=1 ;(1) track_simulation_speed=5 ;(3) ;onlyguidancetime=5 ;(0) skip to secs before next maneuvre ;onlyguidancedist=500 ;(100) when simulate skip to distance before next maneuvre autoreplan_action=AUTO ;(AUTO) pedestrian_pos_filter_enabled=1 ;(1) slowspeed_time=5 ;(5) slowspeed_limit=5 ;(5) show_city_in_next_street=1 ;(1) show_city_in_next_street_distance=1000 ;(1000) junction_view_type="NNG" ; used by UI to determine which JV type to use, other options are "NNG_NQ" or "NQ" junction_view_at_maneuver=0 ;(1) junction_view_on_highways_only=1 ;(1) junction_view_distance=150 ;(200) junction_view_distance_ramp=300 ;(400) junction_view_distance_highway=400 ;(800) simple_crossborder_warning=0 ;(0) crossborder_warning=real ;(off) simple real smart turn_direction_ding=1 ;(0) config/turndir.csv max_exit_number=9 ;(9) dead_reckoning_duration=480000 use_duration_for_tunnel=0 stop_at_tunnel_end=1 ;sim_speed_factor=2 ;(0) onlyguidancedist=100 ;(100) skip simu to last 100 mtr next maneuvre onlyguidancetime=0 ;(0) skip simu to last x sec next maneuvre ;######################################################################## [oasis] exclude_directories="PICTURE::%SDCARD%/,PICTURE::%myflashdisk%/" include_directories="PICTURE::%SDCARD%/Pictures/" [oasis.pictures] slideshow_time=3 slideshow_effect=1 slideshow_loop=1 loadhq=0 large_pict_size=1024 ;######################################################################## [other] demo_enabled=0 ;1 No demo button in navigate multiple_voice=0 ;(0) Uses english tts voice for alerts :)

;########################################################################

[phone]
show_dialer=1 ;getsysentry
show_hangup=1 ;getsysentry
show_bluetooth=1 ;getsysentry

;########################################################################

[poi]
use_multi_poi_icon=0 ;(1)
;### poi_grouping_disctance etc in mapstates.ini [default]
userpoi_has_mypoi=1 ;(0)
use_lastknowngps=1 ;(0)

; Airport, Business, Car_Dealer_Repair, Communication, Community, Finance Leisure
; Medical, Nature, Parking, Petrol_Station, Rent_A_Car, Restaurant, Shopping, Sport
; Tourist_Attractions, Transportation

sort_order="Petrol_Station,Parking,My Poi,Restaurant,Shopping,Accomodation,Medical" ;("Restaurant,Accomodation,Petrol_Station,Parking,Medical")
priority="Petrol_Station,Parking,My Poi,Restaurant,Shopping,Accomodation,Medical" ;("Restaurant,Accomodation,Petrol_Station,Parking,Medical")
sort_by_config=1 ;(0)

picturepoi_show_all_containers=1
picturepoi_has_mypicturepoi=1

;########################################################################

[power]
;skip_suspend_process_all=1 ;getsysentry
powermgm_state=1
allow_battery_full=1

;########################################################################

[rawdisplay]
gx_force_using_dll=1 ;(0)
;force_15_bpp=1 ;(0)
driver=GX ;GLES GX GDI
;see multimode.ini
;stretch=1
;stretch_x=1
;stretch_y=1

;########################################################################

[route]
min_suspend_time=1800000 ;getsysentry
trip_offset=1000 ;getsysentry
;### if you fiddle with these delete save/route.dat before starting igo
planned_route_weight=1 ;(7) smaller is less nervous recalc (0 to 10)
correctness=95 ;(88)
route_type=ECO ;(FAST,ECO,SIMPLE,SHORT,SCENIC,MOST_FREEWAYS,LEAST_FREEWAYS) GREEN
speed_profile_weight=100 ;(100)
;fixed_correctness=? ;?

vehicle_type=7 ;0...6(7 8 9) car taxi bus truck emergency pedestrian bicycle (7=slow_car 8=fast_car 9=motorcycle)

;### vehicle_type=7 slow_car
slow_car_speed=70 ;(80) affects routing and time
slow_car_multiplactor=90 ;(80) affects routing and time
;### vehicle_type=8 fast_car
fast_car_speed=120 ;(130) affects routing and time
fast_car_multiplactor=100 ;(100) affects routing and time
;### vehicle_type=9 motorcycle
motorcycle_speed=120 ;(130) affects routing and time
motorcycle_multiplactor=100 ;(100) affects routing and time

offroad_speed=20 ;(30)

permit_penalty=1000 ;see [truck]
charge_penalty=1000 ;(0)
toll_penalty=100 ;(0)
bridge_penalty=100 ;(0) in meters?
tunnel_penalty=0 ;(0)
uturn_penalty=5000 ;(1000)
low_speed_zone_penalty=90 ;(0)

straight_start_on_recalc=0 ;(0) 1 is auto recalc bug?

continue_with_ferry=1 ;(0)
handle_freeway_as_highway=0 ;(0)
allow_offroad_waypoints=1 ;(0)

minimum_hnr_distance_km=100 ;(100) use hnr if trip > 100 km

auto_enable_crossborder=1 ;(0)
guidance_at_highway_entry=1 ;(0)

;# Primo 1.1
;allow_4wd=0 ;(0)
;fuel_consumption_urban=
;fuel_consumption_rural=
;engine_type=
fuel_cost=”1.5″

[route.histspeed]
enabled=0 ;(1)
show=0 ;(0)
use_timeslice=1 ;(0) start.lua switches it off anyway

[route.histspeed.timeslice]
day=0 ;(0)
hour=0 ;(8)
minute=30 ;(0)

;########################################################################

[scheduler]
disable_smooth_anim=1 ;(0)

;########################################################################

[screen]
daymode_until_no_time_sync=1 ;(0)
;preferred_orientation=0
orientation_lock=0 ;(0)

;########################################################################

[sound]
;ding=0 ;no annoying announcement ding
maneuver_chimes=0 ;no annoying announcement ding
wheelsound=1 ;(0) scroll list sound

dynamic_volume_type=1 ;(1)
;dynamic_volume_minspeed=30 ;(90)
;dynamic_volume_maxspeed=120 ;(150)
;dynamic_volume_voicemaxspeed=100 ;(120)
;dynamic_volume_voice_volume_max=100 ;(64)
;dynamic_volume_os_volume_max=255 ;(255)
;dynamic_volume_os_amplification_step=-1 ;(-1)
;dynamic_volume_autocalc_maxvoicespeed=0 ;(0)

tts_volume=255 ;(255)
guidance_volume=255 ;(255)
alarm_volume=255 ;(255)
effect_volume=255 ;(255)
mic_volume=255 ;(255)
user_volume=175 ;(255)
;welcome=”Broem”

[sound.announcer]
gps_signal_lost=1
gps_disconnected=1

[sound.speech]
delay_msec_between_speeches=600 ;(0)
advanced_guidance_ding=1 ;(0)

;########################################################################

;XXXXX_sound=”!proxi”
;XXXXX_tonal_type=none ;speech alert none
;XXXXX_speech=”Something to say”
;XXXXX_spoken_type=none ;speech alert none
;overspeed
;section_beep
;section_start
;section_end
;approach_beep
;activated

;Primo Speedcam Types
;0 – normal speedcam
;1 – mobile cam
;2 – Traffic Light with Speed check Camera
;3 – avarage speed trap
;4 – Redlight only
;5 -
;6 -
;7 -
;8 -
;9 -
;10 -
;11 -
;12 -
;13 -

;see also [warning]

[speedcam_category:0]
activated_spoken_type=speech
activated_speech=”U nadert Flitser!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 0″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:1]
activated_speech=”U nadert Flitser!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 1″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:2]
activated_speech=”U nadert Flitser!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 2″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:3]
activated_speech=”U nadert traject controle!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 3″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
section_start_spoken_type=speech
section_start_speech=”start traject controle”
section_beep_spoken_type=speech
section_beep_speech=”Te snel. traject controle!”
section_end_spoken_type=speech
section_end_speech=”einde traject controle”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:4]
activated_speech=”U nadert Stoplicht Flitser!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 4″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:10]
activated_speech=”U nadert Flitser!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 10″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:11]
activated_speech=”U nadert Stoplicht Flitser!”
approach_beep_spoken_type=speech
approach_beep_speech=”Flitser 11″
overspeed_spoken_type=speech
overspeed_speech=”Te snel. Flitser!”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:15]
activated_speech=”U nadert betaalde zone!”
approach_beep_spoken_type=speech
approach_beep_speech=”Betaalde zone”
activated_min_speech_repeat_delay=5000 ;msecs?

[speedcam_category:31]
activated_speech=”U nadert gevaarlijk punt!”
approach_beep_spoken_type=speech
approach_beep_speech=”Gevaarlijk punt!”
activated_min_speech_repeat_delay=5000 ;msecs?

;########################################################################

[strapon]
discard_state_timeout=60000 ;(30000) 60 secs
max_position_distance=800 ;(300)
min_gps_precision=50 ;(0) gps.accuracy
max_gps_precision=100 ;(0) gps.accuracy
;min_discard_prob= 0.0 ;(????)
min_distance_for_move_at_low_speed=50 ;(20)
max_speed_for_stop=2 ;(0)
min_distance_for_switch_off_stopping=50 ;(100)
min_speed_for_release_stopping_off=5 ;(10)
offroad_handling=1 ;(0)
debug_offroad_alert=0 ;(0)
disable_heading=0 ;(0)

;########################################################################

[tmc]
enable_flow_icons=1 ;(0) need $traffic_speed.spr
enable_flow_events=1 ;(0) haven’t seen any flowing
flow_stripe_blinking_time=1000 ;(0) in msecs
show_all_provider_list=1 ;(0)
near_provider_distance_km=100 ;(30)
auto_band_search_up=0 ;(0)
auto_tuning=1
;use_new_standard=1
ignore_sid=1

;########################################################################

[traffic.settings]
load_default_traffic_settings=1 ;config/tmcsettings.ini
traffic_enabled=1
use_extra_setting_for_flow_events=1
use_speed_color_codes=1
;flow_speed_coloring=4
announce_recalc_on_auto_only=1
detour_acceptance_mode=2
detour_spare_time_threshold=900 ; detour if 15 minutes lost due to traffic

;########################################################################

[tripcomputer]
num_of_trips=3

;########################################################################

[truck]
vtr=519 ;default truck VTR
max_restriction_level=0

;########################################################################

[tts]
priority=”HIGH” ; CRITICAL VERY_HIGH HIGH NORMAL LOW VERY_LOW
tts_buffer=32786 ;(10240=10k) 32786=32k

automatic_direction_conversion=1 ;(1)
announce_exit_directions=0 ;(0) 1 says first place on exit sign, 2 say road name
skip_exit_numbers=0 ;(0) 1 or 2?
skip_road_numbers=0 ;(0) 1 or 2
always_say_road_names=2 ;(0) 1 or 2 or 3 (Rijksweg A4)

;########################################################################

[warning]

approach_beep_distances=”8,16,24″ ;(“8,16,24″)
warn_distances=”120:1000,100:800,80:500,50:300″ ;(“110:1000,80:800,60:500,40:300″)

speedcam_enabled=1 ;(0)
speedcam_visualtype=1 ;(1) default visual type 0 or 1
speedcam_soundtype=1 ;(1) 1=warn if overspeed 2=approach
speedcam_soundtype_4=2 ; ()
speedcam_visualtype_4=1 ;()
speedcam_warning=1 ;(0)
;speedcam_check_frc=1
speedcam_max_lookahead=1200 ;(1000)

speedwarn_alt_builtup_based=1 ;(0)
speedwarn_alt_limit=1 ;(0)
speedwarn_alt_tolerance=110 ;(100)
speedwarn_alt_toltype=1 ;(0) alternative tolerance type
speedwarn_tolerance=110 ;(100)
speedwarn_toltype=1 ;(0) absolute or percentage

speak_tts_only=0 ;(1)

;speedcam sounds (tts and non tts] are in data.zip:project_config\igo9.ini [speedcam_category:X]

;########################################################################

[warning.driveralert.settings]
max_display_count=3 ;(3)
show_timeout=10 ;(3)
show_vehicle_pictograms=1 ;(1)
preactivate_distance=100 ;(100)
;truck_policy=0 ;(0)
;show_cat=
;warn_cat=
warn_method=2 ;(2)

Pe masura aflarii unor noi setari, ele vor fi adaugate in aceasta sectiune.

2 Responses to Setari igo8,amigo,Primo

  1. Razvan says:

    Ar fi bine dar ar scrie si la fiecare in parte ce face. Sa stiu ce bag si ce nu.

Leave a Reply to Razvan Cancel reply

Your email address will not be published. Required fields are marked *

Blue Captcha Image
Refresh

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>